Shuangjing intelligent equipment tells you that the operation of single-layer veneer hot press is simple and the mainten

The thickness tolerance precision height of the particleboard pressed by the single-layer veneer hot press when in use,the density distribution of the board is uniform when in use,and the multi-layer hot pressing opportunity is in the hot pressing plate because the thickness is unbiased.It is easy to bond wood chips on the thickness gauge of the incoming and outgoing plate during the working process,which affects the thickness tolerance of the soundboard.The density distribution of the finished board is uneven after the thickness is determined by the sanding machine.In addition,the thickness gauge on the hot pressing plate of the multi-layer press bears greater pressure at the end of the plate forming,especially when the thickness of the paved slab is uneven,resulting in the deformation of the hot pressing plate,and the pressed products also deform and form an arc shape.In order to ensure the thickness tolerance of the finished plate,the amount of sanding is also increased.

The edge cutting loss of single-layer hot press is greater than that of single-layer hot press,and the material utilization rate is low.Because each finished plate of the multi-layer hot press needs to cut four sides,while the single-layer press only cuts the whole large and four sides.Generally,for the production line with an annual output of 50000 m3,the cutting loss of the multi-layer press is 3.5 times that of the single-layer press.

The single-layer hot press has large opening gear,long closing time and auxiliary time,long closing time when the plate is broken in the hot plate,thick pre curing layer and large amount of sanding;The single-layer press has the advantages of small opening,short auxiliary time,thin pre curing layer and small amount of sanding.Based on the 16mm plate thickness,the sanding amount is only one third of that of the multi-layer press.

The control operation of single-layer hot press is simple,and the operator only needs to pay attention to one slab;If a slab is not in place due to improper operation,it will inevitably affect the working cycle or produce waste products.Coupled with the perfect automatic detection of single-layer press,it can easily meet the automatic production under unmanned control.

The single-layer hot press has low failure rate,no components during operation,long service life and low maintenance cost.The products produced by the single-layer press are of large format specifications,which can be cut into products of different specifications of non-standard sizes according to the needs of users,so as to meet the needs of users in many aspects,while the product format of the multi-layer press is single.

Keyword:single layer veneer hot press

Article source:http://www.js-sunking.com/